Last updated: June 4, 2026
House Rewiring cost in Kearny Mesa, CA.
Whole-home rewiring is priced by square footage, wall and ceiling access, and how much of the house actually needs new wire. Knob-and-tube and aluminum branch wiring drive most rewire demand in San Diego County, often pushed by insurance non-renewal..
What does house rewiring cost in Kearny Mesa?
In Kearny Mesa, house rewiring runs $10,500–$29,000, with a straightforward job landing near $17,000. Kearny Mesa electrical work is almost entirely commercial and light-industrial. That housing mix is why local pricing sits where it does, not at a flat countywide number. Every quote is flat-rate before work starts, with no trip fee to Kearny Mesa.
Why house rewiring costs what it does in Kearny Mesa
City of San Diego neighborhoods like North Park, Hillcrest, and Old Town have the county's oldest and most varied housing stock, so this is the widest spread we quote. Pre-1920 pockets still have original knob-and-tube, while 1965-73 homes in La Mesa, Lemon Grove, and National City often carry aluminum branch wiring that insurers are flagging for non-renewal. Finished plaster walls slow access, and a partial rewire targeting just the failed circuits runs well under a full-house job.
- Knob-and-tube still active in pre-1920 pockets of North Park, Hillcrest, and Old Town
- Aluminum branch wiring common in 1965-73 homes, often resolved with COPALUM crimp connectors instead of a full rewire
- Finished plaster wall access in older homes adds patch-and-paint labor
- Insurance non-renewal over knob-and-tube or aluminum wiring is the most common reason this call comes in
Kearny Mesa homes and what they need
Convoy District restaurant electrical is our highest-frequency Kearny Mesa call zone.
Neighborhoods we cover for house rewiring in Kearny Mesa: Convoy District, Aero Drive / Sky Park business area, Spectrum Center, Montgomery Field perimeter, Clairemont Mesa Boulevard commercial corridor.
Kearny Mesa is commercial-industrial electrical work, Convoy District restaurant kitchen circuits, warehouse three-phase service, auto-row dealership service bay power, and aerospace-grade equipment runs dominate the call mix. Single-family residential work is the exception, not the rule.
House Rewiring cost breakdown
| Kearny Mesa range | $10,500–$29,000 |
|---|---|
| Typical Kearny Mesa job | $17,000 |
| County baseline | $12,000–$28,000 whole-home; partial rewires from $3,500 |
| Timeframe | Phased rewires 1 to 3 weeks, single rooms 1 to 2 days |
What moves the price
- Home square footage and number of circuits
- Wall and ceiling access: open framing vs finished plaster or lath
- Knob-and-tube, aluminum branch, or failing copper as the failure mode
- Drywall and finish restoration scope after the wire is run
- Panel upgrade if the service cannot carry the new load
- Permit and phased inspections through the local jurisdiction
Ready to book the work? See whole-home rewiring in Kearny Mesa for scope, what's included, and same-day availability.
Kearny Mesa house rewiring cost questions
My insurance company is dropping me over aluminum wiring. Do I need a full rewire?
Not always. If it's just the branch circuits, a COPALUM crimp repair at each connection point often satisfies the insurer for a fraction of a full rewire. We check the full extent of the aluminum run before quoting either way.
Why is the price range so wide for homes in the same neighborhood?
Central San Diego has houses from every decade back to back. One 1920s craftsman might need a full knob-and-tube replacement with plaster repair, and the house next door might just need a partial rewire. We quote after seeing what's actually in the walls.
Can you install three-phase service for a Kearny Mesa warehouse equipment add?
Yes. Three-phase service additions for warehouse and industrial equipment along the Aero Drive, Sky Park, and Spectrum Center corridors are regular work. We do the service entrance load analysis, coordinate with SDG&E on any service upgrade required, install the dedicated equipment circuits with proper breaker sizing and conductor specification, and handle the city building department permit and inspection process. Typical industrial equipment circuit install runs $2,500-$8,500 per equipment hookup depending on amperage, voltage, and conduit routing.
My Kearny Mesa auto dealership needs EV charging for the service department, can you scope it?
Yes. Auto dealership EV charging install (both service-department equipment for EV service capability and customer-facing Level 2 chargers) is increasing volume in the Kearny Villa Road and Spectrum development dealership corridor. We do the service entrance load analysis, coordinate with the dealership on stall count and equipment specification, install the dedicated circuits with proper conduit infrastructure for future expansion, and handle the commercial SDG&E rebate paperwork. Typical dealership EV install runs $25,000-$95,000 depending on stall count and service capacity.
How fast can you quote house rewiring in Kearny Mesa?
Same-week in-person estimates across Kearny Mesa and the rest of San Diego County, most within a couple business days. We give a flat-rate quote before any work starts, and the diagnostic credits toward the job. Call (858) 988-5580 to book.
Where we work in Kearny Mesa
Get a flat-rate house rewiring quote in Kearny Mesa
No trip fee, no hourly surprises. We quote the whole job before we start.